What are modern methods of construction?
Modern methods of construction is a wide term. It covers everything from a whole module made in a factory to a better way of laying blocks on site.
What are modern methods of construction?
Modern methods of construction, or MMC, is the umbrella term for building techniques that move work into a factory or make the work on site more productive. A definition framework published for the UK Government in 2019 sorts it into seven categories, from three-dimensional modules made off site to site processes that reduce labour and improve quality assurance.
Any way of building that moves work off site into a factory, or makes the work left on site quicker and more reliable, falls under modern methods of construction, or MMC. Under that one name sit whole modules, wall and floor panels, factory-made parts and new site processes.
The term is most closely tied to the United Kingdom, where the government had a definition written for it. Because it covers so much, it helps to know which method a project actually means.
The seven categories
In 2019 a working group set up by the UK Ministry of Housing, Communities and Local Government published a definition framework for MMC. It sorts the methods into seven categories, ordered from the most work done off site to site-based improvements:
- Three-dimensional primary structural systems made off site, which are volumetric modules
- Two-dimensional primary structural systems made off site, such as wall, floor and roof panels
- Structural components made off site that are not part of a system, such as beams and columns
- Additive manufacturing, such as 3D printing, for structural and non-structural parts
- Non-structural assemblies and sub-assemblies made off site, such as bathroom pods
- Traditional building products made larger or easier to fit, to reduce labour on site
- Site processes that reduce labour and improve productivity and quality assurance
Where volumetric modular sits
Volumetric modular is the first category. A module is a three-dimensional part of the building, built and fitted out in a factory, then trucked to site and craned into place.
It moves the most work into the factory, so the site and the factory can work at the same time on separate parts of one building. The difference between modules and panels is set out in volumetric and panelised construction, the difference.
What the hybrid adds
Hybrid Volumetric Modular uses the first category for the dwellings and conventional construction for the base structure. Structurally over-engineered modules are built in a climate-controlled factory while the site is prepared, then married to the base structure on site to the millimetre.
The base structure uses the tried and tested materials of conventional construction, and it carries the ground. That lets the method respond to sloping and uneven sites instead of forcing the dwellings up onto a raised platform, which matters most where every entry has to be level. How the method suits real sites is covered in sloping and constrained sites.
Design comes first
Every category of MMC works better when the design is drawn for it from the start. Design for manufacture and assembly makes the way parts are made and joined a part of the design, as explained in what is design for manufacture and assembly.
Our module frames are hot-dipped galvanised, powder-coated steel, bolted at the connections. A bolted connection is simple to make in the factory and simple to check before it is closed in.
Permanent, not temporary
MMC describes how a building is made. It says nothing about how long the building lasts, and a building made off site can be every bit as permanent as one built on site.
Once installed, a MADE module is a premium structural solution compared with conventional in-situ construction. The line between permanent and relocatable buildings is drawn in what is the difference between relocatable and permanent modular.
MADEmodular / MADEbetter.
MADEmodular / MADEbetter.