Modular construction on a Sydney corner block

A corner block gives a project two streets to work from. It also gives the council two streetscapes to protect.

Is a corner block suitable for modular construction?

Yes, and the two street frontages are the reason. A crane has more than one place to stand, and two dwellings can each face their own street. The trade-offs are a setback to each street, sight lines at the intersection that limit fences and driveways, and two street levels for the step-free entries to meet.

Two street frontages are what set a corner block apart, and on a modular project they give the crane and the front doors more options than a mid-block lot. Corner blocks sit where two roads meet, and they are common across Sydney's established suburbs.

The second street also brings a second set of controls. The building has to address two streetscapes, and the council assesses how it sits on both.

Two frontages, two setbacks

On a corner lot one road is treated as the primary frontage and the other as the secondary frontage. The building is set back from both, under the council's local environmental plan and development control plan, or under the code that applies to complying development.

Those setbacks take land from two sides of the lot instead of one. The area left for the building is often a different shape from the lot itself, so it is drawn at feasibility, before any layout is fixed.

Sight lines at the corner

Drivers approaching the intersection need to see across the corner of the lot. Councils protect that view, so fences, walls and planting near the corner are kept low or set back.

Driveways are kept clear of the intersection too. AS/NZS 2890.1, the Australian Standard for off-street car parking, shows the locations near an intersection where a driveway is not permitted, so the driveway usually sits toward the far end of one frontage.

Two front doors

A corner suits two homes well. On a dual occupancy, each dwelling can face its own street with its own front door, which gives both households a clear address and a private arrival. The planning side of two homes on one lot is set out in can you build a dual occupancy for SDA in NSW.

For accessible housing, each of those front doors needs a level path from its street. Where the land falls, the two footpaths sit at different levels, so the floor level is set against both streets at once and the base structure takes up the difference in the ground. The arrival details are covered in access paths, parking and arrival.

Two faces to the street

Both street elevations are seen from the public domain, so both are designed as fronts. Windows, entries and materials are placed with the same care on each side, and a long blank wall facing the secondary street is avoided.

Where the crane stands

On a mid-block lot the crane usually has one possible position in the street. A corner gives at least two, and the better one is chosen for the shortest reach to the set-down point, the clearest approach for the module truck and the fewest power lines and trees overhead.

A crane standing on the road needs a permit and a traffic management plan. Settling the frontage early lets the lift plan, the approvals and the design agree, as set out in how is the crane chosen and the lift planned.

What to check at feasibility

Before design starts, the checks are which frontage is primary, the setback to each street, the sight line controls at the corner, the crane positions and the street level at each front door. The wider list is in what site constraints decide whether a modular project is viable.

MADEmodular / MADEbetter.

How we deliver. Discuss your project.

MADEmodular / MADEbetter.

Let's talk.

Special-use accommodation, made better.