Can you build a dual occupancy for SDA in NSW?

Two homes on one lot is a familiar sight on a Sydney street. Built for SDA, each home is certified and enrolled on its own.

Can you build a dual occupancy for Specialist Disability Accommodation in NSW?

Yes, where the zone permits dual occupancy. In NSW a dual occupancy is two dwellings on one lot, attached or detached. It is approved by development application, or as complying development under the NSW codes for complying development where the site qualifies. Each dwelling is then designed, certified and enrolled as SDA in its own right.

Yes. A dual occupancy is two dwellings on one lot of land, and in NSW it can be built for Specialist Disability Accommodation wherever the zone permits it. The planning system approves the pair as a dual occupancy, while the NDIS treats each dwelling as an SDA dwelling of its own.

That means two sets of requirements running side by side. The planning approval, the building class and the enrolment all have to line up for both homes.

What counts as a dual occupancy

The NSW standard definitions describe two kinds. A dual occupancy (attached) is two dwellings on one lot that are joined to each other, and a dual occupancy (detached) is two detached dwellings on one lot. Neither includes a secondary dwelling, which is a separate land use.

Each council's local environmental plan says whether dual occupancy is permitted in a zone, and it can set a minimum lot size for it, so the zone and the lot are checked first.

The approval pathways

A dual occupancy can be approved through a development application. It can instead be approved as complying development by a certifier where the site and the design satisfy every standard set for it in the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008.

The code is all or nothing, so the choice between the two is made before design starts. A single departure from a standard sends the project back to a development application.

The SDA building type

In the SDA rules, a dual occupancy dwelling usually falls in the villa, duplex or townhouse building type. That type covers a home that shares a wall or a site with another dwelling while keeping its own front door, as explained in what are the SDA building types.

Each dwelling is assessed against the SDA Design Standard for its own design category, and each one is enrolled separately.

Two front doors, both level

The most demanding part of a detached dual occupancy is often the rear dwelling. Its front door can sit a long way from the street, and the path to it has to stay level and wide enough for a wheelchair the whole way, with no step at the door.

That path usually sits beside the driveway, so the driveway grade, the side setback and the drainage are worked out together. Arrival and parking are covered in access paths, parking and arrival.

Fire and sound between the homes

An attached dual occupancy is usually two Class 1a dwellings under the National Construction Code, separated by a fire-resisting wall. The same wall carries the sound separation, which matters when one household's routine goes on through the night.

Subdivision

Whether the lot can then be subdivided, so each dwelling has its own title, depends on the local environmental plan. The choice between the two kinds of title is set out in Torrens title and strata title, the difference.

How the pair is built

Where the two dwellings share a design, they suit a factory well. In Hybrid Volumetric Modular, the modules for both homes are built at the same time while the base structures are prepared on site, then married to them to the millimetre.

That suits an owner or provider who wants both homes ready together. The steps after construction, from the Occupation Certificate to enrolment, are set out in how do you build an SDA dwelling in NSW.

MADEmodular / MADEbetter.

What we deliver. Discuss your project.

MADEmodular / MADEbetter.

Let's talk.

Special-use accommodation, made better.