What is a BASIX certificate in NSW?

BASIX sets the targets for water, energy and thermal performance. The certificate turns them into commitments the finished building has to keep.

What is a BASIX certificate in NSW?

A BASIX certificate shows that a residential design in New South Wales reaches the state's targets for water use, energy use and thermal performance. It is generated through an online tool and lodged with the development application or complying development certificate. It lists commitments, such as window types and insulation, that the finished building has to keep.

BASIX, the Building Sustainability Index, is the NSW scheme that sets targets for how much water and energy a new home uses and how well it holds its temperature. The BASIX certificate is the document that shows a design reaches those targets, and a residential project that needs one has to lodge it with the application for approval.

The rules sit in the State Environmental Planning Policy (Sustainable Buildings) 2022, which has applied to new applications since 1 October 2023.

What it measures

BASIX has three standards: water use, energy use and thermal performance. The applicant enters the design into an online tool, including the floor area, the size and position of each window, the insulation and the type of hot water system, and the tool tests the result against the targets.

The tool also estimates the embodied emissions of the building materials, meaning the carbon that went into making them.

What the certificate holds

The certificate lists the design's sustainability commitments. A specific glazing type on a specific window, an insulation value in the ceiling and a type of hot water system are all recorded as things the building will have.

Those commitments follow the project. A design that changes after the certificate is issued needs the certificate updated to match, and the certifier looks for evidence the commitments were kept before the final Occupation Certificate is issued. That last approval is covered in what is an Occupation Certificate in NSW.

Which buildings need one

The NSW Planning Portal lists residential buildings classified by the National Construction Code as Class 1, Class 2 and parts of Class 4. Class 3 is not on that list. A large boarding house, for example, is a Class 3 building and does not need a certificate, so its energy performance is assessed against Section J of the code.

That matters on special-use accommodation, because the same use can land in different classes. A group home is commonly Class 1b or Class 3, which puts it on either side of the line, so the class is confirmed with the certifier before the energy approach is chosen. The classes are explained in NCC building classes for special-use accommodation.

When it is lodged

A certificate is generated before lodgement and submitted through the NSW Planning Portal with the development application or the complying development certificate. Without it, the application is not complete.

Which of those two pathways applies is a separate question, set out in planning pathways for special-use accommodation in NSW.

How it works in a factory build

The commitments on a BASIX certificate describe things a module carries by the time it leaves the factory. Windows are in, insulation is behind the linings and the services are run, so the certificate and the module documents have to agree before fabrication starts.

That is an advantage when the design is settled early. A window changed once the module is built means a revised certificate as well as rework, so glazing and insulation are resolved during design, alongside the accessibility and the plan.

The factory also helps with the part a certificate cannot check. The tool assumes insulation is continuous and junctions are sealed as drawn, and working under cover with both sides of a wall open makes that far easier to deliver. The detail is in energy and thermal performance in modular.

Why it matters for residents

Thermal performance is more than a compliance line for someone who spends most of the day at home. A dwelling that holds its temperature is more comfortable to live in and costs less to run, and in supported accommodation that benefit reaches the resident every day.

MADEmodular / MADEbetter.

Our standards. Discuss a project.

MADEmodular / MADEbetter.

Let's talk.

Special-use accommodation, made better.