How is a bedroom designed in an SDA dwelling?

An SDA bedroom starts with the bed and the transfer. It still has to feel like the room a resident chooses to spend time in.

How is a bedroom designed in a Specialist Disability Accommodation dwelling?

An SDA bedroom is planned around the bed, the transfer in and out of it and anyone assisting. The SDA Design Standard sets clear space by design category, and higher categories add structural provision for a ceiling hoist. Power, controls, storage and outlook are then placed around the resident's position in the bed.

An SDA bedroom is planned from the bed outwards. The position of the bed sets where a resident transfers, where a carer stands and where a hoist travels, and the door, wardrobe, power and window are then placed to suit.

Each resident has their own bedroom, and a room for overnight support staff is counted separately. For many residents, this is the one room in the home that belongs only to them.

Clear space around the bed

The SDA Design Standard sets the clear space a bedroom has to provide, measured beside the bed, at the door and in front of the wardrobe. The requirements differ by design category and they are at their most demanding in Fully Accessible and High Physical Support dwellings.

The clear space is measured with the furniture in place, so the room is drawn with a real bed in it. A profiling bed, a wheelchair and a person helping all take up floor area at once, and a plan that only works with the bed pushed against a wall has not solved the problem.

Door widths and the space around them are covered in doorways, corridors and circulation space.

The hoist

A High Physical Support bedroom has structural provision for a ceiling hoist. The most useful route for that track is often from the bed to the bathroom, and that decides where the bed goes and how the doorway head is built.

The structure goes in before the ceiling is lined, as set out in ceiling hoists and structural provision, so a hoist can be fitted when a resident needs one.

Power and controls

A resident who spends long periods in bed needs to reach the things that run the room from there. That means light switches, blinds and a way of calling for help placed at the bed as well as at the door, plus outlets for a bed, a mattress pump or other equipment.

Some of that equipment cannot lose power, and the backup arrangements are decided with the rest of the electrical design. The reasoning is in the switchboard and backup power.

The view from the bed

A window that shows sky and garden to someone standing up can show nothing to a person lying down. So we check the sill height and the outlook from the bed position, and we apply the same baseline for green space that carries through all of our special-use design.

Privacy matters just as much, because a bedroom window often faces a shared path. The options are covered in window coverings and privacy in supported accommodation.

Sound and care overnight

The bedroom has to be quiet, and the person providing support overnight has to be able to get there without waking the rest of the home. Where the bedrooms sit against the living areas and the staff room is decided at schematic design.

Where the resident needs a more resilient environment, the wall and door build-up changes as well, and the room still has to read as a bedroom in a home.

Why the width is checked to the millimetre

A small error here costs real money. A bedroom that comes in a few millimetres short of the required width can mean ripping out walls and changing the services behind them.

In a module, the bedroom width is fixed in the documents, built in the factory and checked before the module leaves. The error is found while it is still a measurement, instead of after the room has been lined and painted.

MADEmodular / MADEbetter.

What we deliver. Discuss a project.

MADEmodular / MADEbetter.

Let's talk.

Special-use accommodation, made better.